VH-5C
Multi-Spindle 5C Indexers
COLLET SIZE | MAX TORQUE
5C 88 ft-lb
Note: Motor cover size and shape varies with motor type.
Increase efficiency and production capacity of your CNC machine with one of our Multi-head VH-5Cs. Available in two, three or four-head configurations, a multi head is perfect for making multiple small parts in one set-up. Multi Heads keeps your machine spindle running by reducing the number of tool changes and requiring less frequent operator intervention.
The standard configuration places the motor at the side or we also offer the option to wrap the motor around the back to save space, reduce overall length and eliminate possible machine interferences.
For collet closing capability, the Multi Heads require our air collet closers. Each head also has a 2-3/16" threaded spindle nose if you want to thread on your own fixture or chuck adding further versatility.
Details
​
Dual head 5C with motor and cables
The Index Designs Dual 5C is a true 4th-axis with two 5C collet heads mounted on a sub-plate, complete with compatible servo motor, and 9' extension cables ready to plug into your 4th-axis ready CNC machine.
​
​
Triple head 5C with motor and cables
The Index Designs Tri 5C is a true 4th-axis with three 5C collet heads mounted on a sub-plate, complete with compatible servo motor, and 9' extension cables ready to plug into your 4th-axis ready CNC machine.
​
​
Quad head 5C with motor and cables
The Index Designs Quad 5C is a true 4th-axis with four 5C collet heads mounted on a sub-plate, complete with compatible servo motor, and 9' extension cables ready to plug into your 4th-axis ready CNC machine.
​
Note: Prices do not include installation or parameter changes that may be necessary to adjust for different gear ratios.
For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation.
SINGLE-AXIS PROGRAMMABLE CONTROLLER
​
Don't need true 4th-axis? Just need point-to-point indexing? A cost-efficient solution for any CNC machine that is not 4th-axis-ready. This single-axis, programmable control box will add indexing or semi-4th-axis capability to any machine. It can be easily interfaced using a spare M-code from your CNC machine. Indexing position moves to practically any angle are programmed directly through the front panel of the control box and are triggered by an M-code, or utilize the control box's DNC function to run a complete machine program file from a USB key.
​
Features:
​
-
Easily interfaces to any CNC machine and control including Fanuc, Mitsubishi, Fadal, Haas, Hurco and many others. No expensive 4th axis drive needed.​​​
-
4 Modes of Control:
-
Full DNC to CNC
-
Complete CNC operation by DNC feed.​
-
All XYZA moves and CNC code from the indexer control.
-
Run very large programs directly from your USB.
-
Standard G-code functionality.
-
-
Print from CNC
-
Standard macro DPRNT type commands from CNC.​
-
The CNC feeds the indexer control box each A move.
-
-
M-function Cycle
-
Internal control box programming.
-
The CNC starts each cycle.
-
-
Manual Cycle
-
Internal control box programming with start button activation.​​
-
-
-
External USB for storage and DNC, compatible with 4GB and above.​
-
Fast indexing to any angle.
-
Portable. Easily move from machine to machine.
-
Operates on 110 VAC power.
-
Includes CNC Interface and RS-232 cables for M-function and serial input commands. No other hardware or electronics needed.
-
Made in the USA.​
​
​
Package includes the 5C with manual collet closer and indexing box with all the cables
(including 4-pin M-code cable) and motor. Ready to run.
​
​