top of page


11-inch (280 mm) Rotary Table

   1       280 mm      250 ft lb.      4.0 in.
Note: Motor cover size and shape varies with motor type.

For medium to large parts, the VH-11 rotary table has an 11" (280mm) diameter platter with a 6.75" center height. A 10" or 12" chuck or fixture can easily be bolted to the table using the six precision T-slots. Its large 4" through-hole can be used for bar feeding and special fixture-locating requirements. The spindle and worm have two bearings for front and back support.  As always, the worm wheel is helically cut and throated for greater surface contact between the wheel and worm. There is an optional 10" or 12" manual 3-Jaw chuck and adapter plate available as well as a manual or pneumatic  tailstock with matching center height.


VH-11 Rotary with motor and cables 

The Index Designs VH-11 is a true 4th-axis rotary table that comes complete with compatible servo motor, and 9' extension cables ready to plug into you 4th-axis ready CNC machine. 

4.00 thru hole, low profile 6.75" centerline

First Citizens Bank Button.jpg
VH11 with 8chuck 1.jpg

Note: Prices do not include installation or parameter changes that may be necessary to adjust for different gear ratios. 


For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation. 


Don't need true 4th-axis? Just need point-to-point indexing? A cost-efficient solution for any CNC machine that is not 4th-axis-ready. This single-axis, programmable control box will add indexing or semi-4th-axis capability to any machine. It can be easily interfaced using a spare M-code from your CNC machine. Indexing position moves to practically any angle are programmed directly through the front panel of the control box and are triggered by an M-code, or utilize the control box's DNC function to run a complete machine program file from a USB key. 


  • Easily interfaces to any CNC machine and control including Fanuc, Mitsubishi, Fadal, Haas, Hurco and many others. No expensive 4th axis drive needed.​​​

  • 4 Modes of Control:

    • Full DNC to CNC

      • Complete CNC operation by DNC feed.​

      • All XYZA moves and CNC code from the indexer control.

      • Run very large programs directly from your USB.

      • Standard G-code functionality.

    • Print from CNC

      • Standard macro DPRNT type commands from CNC.​

      • The CNC feeds the indexer control box each A move.

    • M-function Cycle

      • Internal control box programming.

      • The CNC starts each cycle.

    • Manual Cycle

      • Internal control box programming with start button activation.​​

  • External USB for storage and DNC, compatible with 4GB and above.​

  • Fast indexing to any angle.

  • Portable. Easily move from machine to machine.

  • Operates on 110 VAC power.

  • Includes CNC Interface and RS-232 cables for M-function and serial input commands. No other hardware or electronics needed.

  • Made in the USA.​

Package includes the VH-11 rotary and indexing box with all the cables
(including 4-pin M-code cable) and motor. Ready to run.

Indexer Box.249.png
First Citizens Bank Button.jpg
bottom of page