top of page


6.3-inch (160mm) Rotary Table

   1       160 mm      150 ft lb.      1.5 in.
Note: Motor cover size and shape varies with motor type.

The VH-6 is the smallest rotary table we offer featuring 6.3" (160mm) diameter spindle with a 1.5" through hole. The VH-6 features a newly designed pneumatic braking system which offers 120 ft-lbs of brake holding.  The VH-6 maintains a rigid design with dual bearings both in the front and rear of the spindle. The centerline is 5.5". There is an optional 6" 3-Jaw chuck and adapter plate available as well as a 5C nose piece with either manual or air collet closer.


VH-6 Rotary with motor and cables 

The Index Designs VH-6 is a true 4th-axis rotary table that comes complete with compatible servo motor, and 9' extension cables ready to plug into you 4th-axis ready CNC machine.  


175 lbs,  1.5 thru hole, low profile 5.5" centerline


First Citizens Bank Button.jpg
VH11 with 8chuck 1.jpg

Note: Prices do not include installation or parameter changes that may be necessary to adjust for different gear ratios. 


For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation. 


Don't need true 4th-axis? Just need point-to-point indexing? A cost-efficient solution for any CNC machine that is not 4th-axis-ready. This single-axis, programmable control box will add indexing or semi-4th-axis capability to any machine. It can be easily interfaced using a spare M-code from your CNC machine. Indexing position moves to practically any angle are programmed directly through the front panel of the control box and are triggered by an M-code, or utilize the control box's DNC function to run a complete machine program file from a USB key. 


  • Easily interfaces to any CNC machine and control including Fanuc, Mitsubishi, Fadal, Haas, Hurco and many others. No expensive 4th axis drive needed.​​​

  • 4 Modes of Control:

    • Full DNC to CNC

      • Complete CNC operation by DNC feed.​

      • All XYZA moves and CNC code from the indexer control.

      • Run very large programs directly from your USB.

      • Standard G-code functionality.

    • Print from CNC

      • Standard macro DPRNT type commands from CNC.​

      • The CNC feeds the indexer control box each A move.

    • M-function Cycle

      • Internal control box programming.

      • The CNC starts each cycle.

    • Manual Cycle

      • Internal control box programming with start button activation.​​

  • External USB for storage and DNC, compatible with 4GB and above.​

  • Fast indexing to any angle.

  • Portable. Easily move from machine to machine.

  • Operates on 110 VAC power.

  • Includes CNC Interface and RS-232 cables for M-function and serial input commands. No other hardware or electronics needed.

  • Made in the USA.​

Package includes the VH-6 rotary and indexing box with all the cables
(including 4-pin M-code cable) and motor. Ready to run.

Indexer Box.249.png
First Citizens Bank Button.jpg
bottom of page