8.25-inch (210 mm) Rotary Table
SPINDLE | PLATTER SIZE | MAX TORQUE | THROUGH BORE
1 210 mm 150 ft lb. 2.0 in.
Note: Motor cover size and shape varies with motor type.
Our best sellers, the VH-8 has a 8.25" (210mm) diameter spindle with a 2.0" through hole. With 225 ft. lbs. of brake torque, the VH-8 maintains a rigid design with dual tapered roller bearings supporting the front and back of the spindle. The centerline is 6.75". The worm wheel is helically cut and throated for increased surface contact between the wheel and worm. This provides longevity and helps maintain the accuracy of the rotary table over time. There is an optional 8" 3-Jaw chuck and adapter plate available as well as a 5C nose piece with either manual or air collet closer.
The standard configuration places the motor at the side or we also offer the option to wrap the motor around the back to save space, reduce overall length and eliminate possible machine interferences. The wrap around motor option does restrict the length on through hole capability.
If you like our VH-8 but need a larger through hole, our VH-8XL is your answer offering a 3.27" through bore combined with all the other great features and specifications of the VH-8.
OPTIONS / ACCESSORIES
VH-8 Rotary with motor and cables
The Index Designs VH-8 is a true 4th-axis rotary table that comes complete with compatible servo motor, and 9' extension cables ready to plug into you 4th-axis ready CNC machine.
Starting price: $9,395.00
*Wrap around motor +$1,000.00*
180 lbs, 2.00 thru hole, low profile 6.75" centerline
Note: Prices do not include installation or parameter changes that may be necessary to adjust for different gear ratios.
For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation.
SINGLE-AXIS PROGRAMMABLE CONTROLLER
Don't need true 4th-axis? Just need point-to-point indexing? A cost-efficient solution for any CNC machine that is not 4th-axis-ready. This single-axis, programmable control box will add indexing or semi-4th-axis capability to any machine. It can be easily interfaced using a spare M-code from your CNC machine. Indexing position moves to practically any angle are programmed directly through the front panel of the control box and are triggered by an M-code, or utilize the control box's DNC function to run a complete machine program file from a USB key.
• Easily interfaces to any CNC machine and control including Fanuc, Mitsubishi, Fadal, Haas, Hurco and many others. No expensive 4th axis drive needed.
• No need to program the box separately Write one program for all X, Y, Z and A(4th) axis moves. Cycle start in activated by the machine, no operator interaction needed.
• Fast indexing to any angle.
• Portable. Easily move from machine to machine.
• Operates on 110 VAC power.
• Includes CNC Interface and RS-232 cables for M-function and serial input commands. No other hardware or electronics needed.
• Made in the USA.
Package includes the VH-8 rotary and indexing box with all the cables
(including 4-pin M-code cable) and motor. Ready to run.
Package Price: $11,890.00
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and other dealer installed accessories are not included. All prices are in U.S. dollars.